CY SMT lead free small 8 zones reflow oven machine CY-P810 Featured Image

CY SMT lead free small 8 zones reflow oven machine CY-P810

Features:

(1) Windows7 operating system, Chinese and English interface switch, easy to operate

(2) Fault diagnosis function, can display each fault, display and store in automatic alarm list

(3) Control procedures canl backup the data report, easy to ISO9000 management

(4) CY series reflow welding is focused orequipment including anew energy-efficient (duct structure)consumption. lower energy consumption and lower carbon emissions

(5) CY series not only meets the highest requirements of lead freeand welding, but also guarantees higrguality welding effect, and improves heat conduction technology to avoid overheating of electronic parts on PCB board.


Product Detail

Product Tags

Specifications:

The heating part parameters
Heating area number Number of heating zones up 8/down 8
Number of cooling zone Number of cooling zones Top 1/Bottom 1
The heating mode of top Upper heating method: full hot air
The heating mode of bottom Lower heating method: full hot air
Transportation part parameters
PCB maximum width PCB maximum width guide rail 50-350mm, mesh belt 400mm
Transport direction Transportation direction L → R left → right
Conveyor belt speed Transport belt height: mesh belt 875 ± 20mm, 900 ± 20mm
Transmission way Transmission method: network transmission+chain transmission
Conveyor belt speed Transport belt speed 300-2000mm/Min
Transportation part parameters
The power supply Power supply 5-wire 3-phase 380V 50/60Hz
Start the power Starting power 35Kw
Normal work consumed power Normal working power consumption Approx.65Kw
Heating up time Heating up time approximately 15-20 minutes
The temperature control range Temperature control range: Room temperature -300 ℃ Room temperature feature -300 ℃
Temperature control mode Temperature control method: full computer PID closed-loop control, SSR drive
The whole machine control mode Whole machine control method: PC computer+PLC control
The temperature control precision Temperature control accuracy ± 1 ℃
The deviation of PCB temperature distribution Temperature distribution deviation of PCB board ± 1-2 ℃
Cooling way Cooling method Air machine: air cooling
Abnormal alarm Abnormal alarm temperature abnormal (high or low after constant temperature)
Three color light Three color light indicating three color signal light: yellow - temperature rise; Green - constant temperature; Red - Abnormal
The body parameter
Weight Weight Approv.1300Kg
Installation dimensions(mm) Overall size (mm) L4600 × W900 × H1450
Exhaust air requirements Exhaust air volume requirement: 8 cubic meters per minute, 2 channels with a diameter of less than 180mm