* 1 Specification conditions (Applicable part: Aluminum electrolytic capacitor (φ 8 mm), Feeder: two MRF-S, Placement conditions: Simultaneous pick, sequential insertions using 2 nozzles)
* 2 Specification conditions (Applicable part: Connector (4 pin), Insertion conditions: 2 sequential picks and insertions using 2 nozzles)
* 3 Board transfer and mark recognition time not included.
* 4 When the part height is 16 mm.
Standard specification (Lsize PWB) |
Clinch specification (Lsize PWB) |
|||
With using Clinch unit | Without using Clinch unit | |||
Board Size | 1 time clamping | 50㎜×50㎜~410㎜×360㎜ | 80㎜×100㎜~410㎜×360㎜ | 80㎜×50㎜~410㎜×360㎜ |
2 times clamping | 50㎜×50㎜~800㎜×360㎜ | 80㎜×100㎜~800㎜×360㎜ | 80㎜×100㎜~800㎜×360㎜ | |
PCB Weight | max.4kg | |||
Component Height | max.30㎜ | |||
Component Size | Laser recognition | 0603~□50mm | ||
Vision recognition | □3mm~□50mm | |||
Insertion Speed (Insertion components) |
Vacuum | 0.6 sec/part*1*3*4 | ||
grip | 0.8 sec/part*2*3*4 | |||
Placement Accuracy (SMT) |
Laser recognition | ±0.05mm(3σ) | ||
Vision recognition | ±0.04mm |